Leyburn electronic distance measurement (EDM) baseline
Baseline status
Suitable for use while certificate remains valid.
Reporting problems
Contact the Regional Calibration Officer (listed under the 'Contacts' heading) as soon as possible if any of the following information is incorrect or to report any problems with the baseline.
Location
The Leyburn baseline is located within a scientific reserve (1/SP220298) situated approximately 10km northeast of the Darling Downs township of Leyburn. This site has restricted access.
Access
The site is accessed from Toowoomba via the Toowoomba Karara Road and Rosenthal Boundary Road. Rosenthal Boundary Road has approximately 4.5km of formed gravel road and 2km of graded track. This road is a dry weather only and high clearance vehicles are recommended.
Bookings
This site must be booked prior to use and a security key obtained from one of the business centres noted below. Contact one of the department business centres listed below to arrange bookings, payments and collection of security keys.
Design
Type: 7 station Schwendener. Stations are concrete pillars housed in fenced enclosures.
Datum RL: The datum plane is based on reduced level (RL) 415.0 metres. Reduced levels for the stations are derived from Station 1 – Permanent Survey Mark (PSM) 199101.
Alignment: Base alignment is from Station 7 → 2. Offsets are negative to the left and positive to the right of the line viewed from Station 7.
PSMs
Station # | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
PSM # | 199101 | 199102 | 199103 | 199104 | 199105 | 199106 | 199107 |
Notes
- The security key will not be issued until full payment for the range use has been received.
- Instrument observations should commence from station 1.
- Observation may be impacted by significant shade from neighbouring trees in the afternoon.
- This site should only be accessed in dry weather.
- The security gate at the southern entrance should remain closed at all times to restrict livestock movement. Respect the property of adjoining landowners and their livestock.
- Ensure all gates are closed and pillar caps are placed on pillars prior to leaving the site.
- For additional information regarding the use of this site and/or the calibration of measuring equipment, contact the Regional Calibration Officer.
Regulation 13 certificate
Contacts
Regional Calibration Officer
Bob Jenkins
Department of Resources
203 Tor Street
TOOWOOMBA QLD 4350
Phone: (07) 4529 1310
Department of Resources (business centres)
203 Tor Street
TOOWOOMBA QLD 4350
Phone: (07) 4529 1200
1-3 Alfred St
ROMA QLD 4455
Phone: (07) 4624 1500
Government Offices
1st Floor
Cnr Guy & Fitzroy Streets
WARWICK QLD 4730
Phone: (07) 4661 0200
42 Callandoon Street
GOONDIWINDI QLD 4390
Phone: (07) 4671 6100
- Last reviewed: 18 Nov 2022
- Last updated: 18 Nov 2022