Conversion of petroleum wells to water-related bores
What's new
A new practice direction and data submission templates are available below. Read more about new reporting requirements and implementation timelines.
You must notify us before you start converting a well to a water bore and after you have finished the conversion. You also need to notify us and provide a report if you decommission or abandon the bore.
Read how to meet your notification and reporting obligations under Queensland resources legislation, and download a flowchart of reporting requirements for conversion of wells to water-related bores (PDF, 135KB).
Notes:
- You can only convert a petroleum well that was drilled after 1 January 2012.
- A well conversion may be required before you can transfer the ownership of the well.
Permits this applies to
- Authority to prospect
- Petroleum lease
- Water monitoring authority
Before starting activities
Check requirements for land access and other notices before starting petroleum and gas activities.
How to lodge your notices and reports
The tables below show what you need to submit and how to do it. If you need more help:
- refer to the legislation (references in the tables below)
- read the Practice direction - petroleum and gas reporting (PDF, 2.6MB) and use the Petroleum and gas data submission template (XLS, 745KB)
- read about lodging reports into the GSQ Lodgement Portal
- read about using MyMinesOnline.
Conversion
| Report/notice and legislation | When to lodge | How to lodge |
|---|---|---|
| PA-42 – Notice of intention to convert a petroleum well to a water observation bore or water supply bore (PDF, 401KB) (P&G Act1 s. 283(1)(ii)) (Pet Act2 s. 75L) | Before conversion | Post or email notice to Petroleum Assessment Hub |
|
CS2887 - Drill log form (notice about water injection bore, water observation bore or water supply bore to Water Act regulator) (PDF, 367KB) (P&G Act s. 543A, P&G Regs s. 19A) (Pet Act s. 75XA) (General Regs3 s. 12) | Within 60 business days after the day the drilling or conversion starts | Post or email notice to Petroleum Assessment Hub |
|
PGGD-02 – Notice of completion, alteration or abandonment of petroleum well or bore (General Regs s. 30) | Within 10 business days after completion, alteration or abandonment | Complete online form in the GSQ Lodgement Portal |
| WRA-05A – Notice of completion of conversion of petroleum well to water supply bore or water observation bore (PDF, 275KB) (P&G Act s. 284) (Pet Act s. 75M) (General Regs s. 11) | Within 10 business days after completion, alteration or abandonment | Post or email notice to Petroleum Assessment Hub |
1P&G Act: Petroleum and Gas (Production and Safety) Act 2004
2Pet Act: Petroleum Act 1923
3General Regs: Petroleum and Gas (General Provisions) Regulation 2017
Decommissioning and abandonment
| Report/notice and legislation | When to lodge | How to lodge |
|---|---|---|
| MMOL44 – Notice of decommissioning a well, water observation bore or water supply bore (PDF, 149KB) (P&G Act1 s. 292) (Pet Act2 s. 75U) | Before decommissioning | Post or email notice to Petroleum Assessment Hub |
|
PGGD-02 – Notice of completion, alteration or abandonment of petroleum well or bore (General Regs3 s. 30) | Within 10 business days after completion, alteration or abandonment | Complete online form in the GSQ Lodgement Portal |
|
Well or bore abandonment report (General Regs s. 37) | No later than 2 months after completion of plugging and abandonment of bore | Follow the practice direction and use the data submission template above. Upload all files to the GSQ Lodgement Portal |
1P&G Act: Petroleum and Gas (Production and Safety) Act 2004
2Pet Act: Petroleum Act 1923
3General Regs: Petroleum and Gas (General Provisions) Regulation 2017
- Last reviewed: 29 Jul 2020
- Last updated: 30 Sep 2020