Water

Self-reading your water meter

You must read and submit your water meter reading to the Department of Regional Development, Manufacturing and Water. We will tell you when this is required via a meter reading notice.

Check for faults

Make sure you regularly inspect your meter to ensure it isn't faulty.

When you give your meter reading to the department, you must report any fault with the meter as well. The meter reading notice will explain how to do this.

You'll need to report any fault within 3 business days.

Submit your meter reading

You can submit your meter reading online.

Submit your meter reading

Alternatively, you can print and complete a meter reading form (PDF, 1.6MB) and return it to the department.

How to read your meter

The information below provides guidance about how to obtain readings from specific types of water meters.

	Davies Shepherd Provide the series of numbers on the dial of your meter including leading and trailing zeros. In this example, the reading would be 363173
	Elster R2000 Water Meter 80 - 125mm Provide the series of numbers on the dial of your meter including leading and trailing zeros. In this example, the reading would be 1395965
	Elster R2000 Water Meter 150 - 300mm Provide the series of numbers on the dial of your meter including leading and trailing zeros. In this example, the reading would be 0000028
	Elster R1000 Water Meter 50mm - 125mm Provide the series of numbers on the dial of your meter including leading and trailing zeros. In this example, the reading would be 000002
	Elster R1000 Water Meter 150mm - 300mm Provide the series of numbers on the dial of your meter including leading and trailing zeros. In this example, the reading would be 000001
	Siemens MAG 8000 Water Meter Provide the series of numbers on the dial of your meter including leading and trailing zeros. In this example, the reading would be 00075642. Under normal conditions the meter will display the total volume that has passed through the meter in megalitres. Pressing the key (black triangle in the yellow square) will cycle the display through the display screens: total volume in megalitres total reverse volume in megalitres flowrate in megalitres per day error status display test. After 10 minutes without pressing the key, the display will time-out and go back to the total volume display
	Arad Multijet Water Meter Provide the series of numbers on the dial of your meter including leading and trailing zeros. For example, this reading would be 000004
	Arad IRT Water Meter 80mm - 250mm Provide the series of numbers on the dial of your meter including leading and trailing zeros. For example, this reading would be 000004
	Arad Turbo WST Water Meter 50mm - 200mm Provide the series of numbers on the dial of your meter including leading and trailing zeros. For example, this reading would be 000005