Current location of water allocations in the Proserpine River Water Supply Scheme

A change to the location of a water allocation is possible between zones.

If the change can be made within the maximum and minimum constraints set by the trading rules then the change will generally be approved.

HIGH-A PRIORITY priority water allocations (ML)
PROSERPINE RIVER WATER SUPPLY SCHEME Nominal Volumes as at COB 19th January 2020
Location Minimum Volume (ML) Current Volume (ML) Maximum Volume (ML) Projected Volume (ML) *
Proserpine Zone A 6,357 13,357 16,357 13,357
Proserpine Zone B 5,643 8,643 15,643 8,643
Proserpine Zone C 0 0 0 0
Proserpine Zone D 0 0 0 0
All values in Megalitres

* This represents the forecasted 'current volume' assuming all outstanding dealing certificates or matters under review are registered on the water allocations register.

A combined maximum or minimum volume for two or more zones means the total current volume for all those zones, when added together, must not breach that maximum or minimum figure. For example, if two zones have a combined maximum volume of 1,000ML then the current volume of both zones must always be at or below 1,000ML.

Some zones will also have individually specified maximum or minimum volumes as well as a combined maximum or minimum volume. For example, if Zone 1 and Zone 2 specify a maximum volume of 800ML and 950ML respectively, then the current volume for each zone must not exceed the volume specified for If both these zones also have a combined maximum volume of 1,500ML then the current volume of both zones combined must not exceed 1,500ML.


MEDIUM-A1 PRIORITY priority water allocations (ML)
PROSERPINE RIVER WATER SUPPLY SCHEME Nominal Volumes as at COB 19th January 2020
Location Minimum Volume (ML) Current Volume (ML) Maximum Volume (ML) Projected Volume (ML) *
Proserpine Zone A 0 9,963 27,426 9,963
Proserpine Zone B 5,000 17,913 36,142 17,913
Proserpine Zone C 0 0 0 0
Proserpine Zone D 0 0 0 0
All values in Megalitres

* This represents the forecasted 'current volume' assuming all outstanding dealing certificates or matters under review are registered on the water allocations register.

A combined maximum or minimum volume for two or more zones means the total current volume for all those zones, when added together, must not breach that maximum or minimum figure. For example, if two zones have a combined maximum volume of 1,000ML then the current volume of both zones must always be at or below 1,000ML.

Some zones will also have individually specified maximum or minimum volumes as well as a combined maximum or minimum volume. For example, if Zone 1 and Zone 2 specify a maximum volume of 800ML and 950ML respectively, then the current volume for each zone must not exceed the volume specified for If both these zones also have a combined maximum volume of 1,500ML then the current volume of both zones combined must not exceed 1,500ML.


MEDIUM-A2 PRIORITY priority water allocations (ML)
PROSERPINE RIVER WATER SUPPLY SCHEME Nominal Volumes as at COB 19th January 2020
Location Minimum Volume (ML) Current Volume (ML) Maximum Volume (ML) Projected Volume (ML) *
Proserpine Zone A 0 0 0 0
Proserpine Zone B 0 0 0 0
Proserpine Zone C 0 3,000 3,000 3,000
Proserpine Zone D 0 0 0 0
All values in Megalitres

* This represents the forecasted 'current volume' assuming all outstanding dealing certificates or matters under review are registered on the water allocations register.

A combined maximum or minimum volume for two or more zones means the total current volume for all those zones, when added together, must not breach that maximum or minimum figure. For example, if two zones have a combined maximum volume of 1,000ML then the current volume of both zones must always be at or below 1,000ML.

Some zones will also have individually specified maximum or minimum volumes as well as a combined maximum or minimum volume. For example, if Zone 1 and Zone 2 specify a maximum volume of 800ML and 950ML respectively, then the current volume for each zone must not exceed the volume specified for If both these zones also have a combined maximum volume of 1,500ML then the current volume of both zones combined must not exceed 1,500ML.


MEDIUM-A3 PRIORITY priority water allocations (ML)
PROSERPINE RIVER WATER SUPPLY SCHEME Nominal Volumes as at COB 19th January 2020
Location Minimum Volume (ML) Current Volume (ML) Maximum Volume (ML) Projected Volume (ML) *
Proserpine Zone A 0 0 0 0
Proserpine Zone B 0 0 0 0
Proserpine Zone C 0 0 0 0
Proserpine Zone D 0 10,000 10,000 10,000
All values in Megalitres

* This represents the forecasted 'current volume' assuming all outstanding dealing certificates or matters under review are registered on the water allocations register.

A combined maximum or minimum volume for two or more zones means the total current volume for all those zones, when added together, must not breach that maximum or minimum figure. For example, if two zones have a combined maximum volume of 1,000ML then the current volume of both zones must always be at or below 1,000ML.

Some zones will also have individually specified maximum or minimum volumes as well as a combined maximum or minimum volume. For example, if Zone 1 and Zone 2 specify a maximum volume of 800ML and 950ML respectively, then the current volume for each zone must not exceed the volume specified for If both these zones also have a combined maximum volume of 1,500ML then the current volume of both zones combined must not exceed 1,500ML.



Seasonal Water Assignment Rules
Maximum allowable water use volumes for the Proserpine River Water Supply Scheme

Zone                     Maximum allowable water use volumes (ML)
Proserpine A         43,783
Proserpine B         51,785
Proserpine C           4,500
Proserpine D         15,000

Contact

General enquiries 13 QGOV (13 74 68)