Current location of water allocations in the Barker Barambah Creeks Water Supply Scheme

A change to the location of a water allocation is possible between zones.

If the change can be made within the maximum and minimum constraints set by the trading rules then the change will generally be approved.

HIGH priority water allocations (ML)
BARKER BARAMBAH WATER SUPPLY SCHEME Nominal Volumes as at COB 19th January 2020
Location Minimum Volume (ML) Current Volume (ML) Maximum Volume (ML) Projected Volume (ML) *
Barambah Zone HB 0 0 0 0
Barambah Zone HC 450 450 450 450
Barambah Zone HD 1,786 1,786 1,786 1,786
Barambah Zone HE 0 0 0 0
Barambah Zone HZ 0 0 0 0
Barambah Zone JA 0 0 0 0
All values in Megalitres

* This represents the forecasted 'current volume' assuming all outstanding dealing certificates or matters under review are registered on the water allocations register.


MEDIUM priority water allocations (ML)
BARKER BARAMBAH WATER SUPPLY SCHEME Nominal Volumes as at COB 19th January 2020
Location Minimum Volume (ML) Current Volume (ML) Maximum Volume (ML) Projected Volume (ML) *
Barambah Zone HD 777 1,672 2,577 1,672
Barambah Zone HB 9,633 10,277 16,661 11,002 10,277
Barambah Zone HZ 4,953 5,714 6,659 5,714
Barambah Zone HC 6,147 7,102 15,321 8,662 7,102
Barambah Zone HZ 4,953 5,714 6,659 5,714
Barambah Zone HE 5,314 4,343 4,501 7,314 7,040 4,501
Barambah Zone JA 24 2,813 2,721 2,813
All values in Megalitres

* This represents the forecasted 'current volume' assuming all outstanding dealing certificates or matters under review are registered on the water allocations register.

A combined maximum or minimum volume for two or more zones means the total current volume for all those zones, when added together, must not breach that maximum or minimum figure. For example, if two zones have a combined maximum volume of 1,000ML then the current volume of both zones must always be at or below 1,000ML.

Some zones will also have individually specified maximum or minimum volumes as well as a combined maximum or minimum volume. For example, if Zone 1 and Zone 2 specify a maximum volume of 800ML and 950ML respectively, then the current volume for each zone must not exceed the volume specified for If both these zones also have a combined maximum volume of 1,500ML then the current volume of both zones combined must not exceed 1,500ML.


Contact

General enquiries 13 QGOV (13 74 68)